All articles

Bottle Cage Adapter Accessory InstallUpdated 8 months ago

Installing the Handlebar bottle cage adapter:

A 5mm allen will be used to install the adapter.

Step 1: 

Place both shims on top the handlebar about 1cm from the stem so that it sits on the section of the handlebar that is not sloped.

Step 2:

Place the cage portion on the handlebar then hook the clamp under the slot and gently keep the parts squeezed together

Step 3:

Insert the bolt into the clasp and use the 5mm to tighten the bolt all the way down

You are all set!  Finished install should look like this

Was this article helpful?